{"product_id":"recessed-shower-niche-425x625x90mm-prefabricated-tile-ready-wall-recess","title":"Shower Niche 425 x 625 x 90mm — Prefabricated Recessed Wall Niche","description":"\u003cp\u003e\u003cstrong\u003eA prefabricated recessed shower niche, ready to install\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eA prefabricated niche made from coated XPS backer board. You cut and frame the opening, fix the niche to the framing, waterproof it and tile it.\u003c\/p\u003e\n\n\u003cp\u003eThe body is closed-cell extruded polystyrene with fibreglass mesh embedded in a polymer-modified cement coating on both faces, finished in a black coating. It absorbs no more than 1.2% water by volume.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eMade for Australian framing\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe niches are built for a 90 mm timber stud wall. A 70 mm wall is too shallow and needs packing out first. Every niche comes with 10 screws and 10 stainless steel washers in the box.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat it will take\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIt is a single open recess with no internal divider. Once installed, tiled and grouted, the base carries a maximum static load of 20 kg. Tiles must be at least 100 × 100 mm and at least 7 mm thick, and the tile weight must not exceed 62 kg per square metre.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitting it\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eMeasure the niche itself, then cut the opening to its external size plus 2 to 3 mm all round.\u003c\/li\u003e\n\t\u003cli\u003eAll four edges must be supported by framing.\u003c\/li\u003e\n\t\u003cli\u003eSet the niche with its front edges flush with the face of the wall lining. Fix it level and plumb, through its top, bottom and side walls into the surrounding studs and noggings, with the 10 screws and 10 washers supplied. Each screw must go at least 20 mm into the timber.\u003c\/li\u003e\n\t\u003cli\u003eSeal every screw head and the joint around the niche with waterproof sealant that is compatible with your waterproofing membrane.\u003c\/li\u003e\n\t\u003cli\u003eTile the base with a slight fall towards the front so water drains out. The fall is built in the tile adhesive.\u003c\/li\u003e\n\t\u003cli\u003eRectangular niche can be installed horizontally or vertically.\u003c\/li\u003e\n\t\u003cli\u003eDo not trim the niche to suit a shallower wall. Pack the wall out instead.\u003c\/li\u003e\n\t\u003cli\u003eIn masonry, bed the niche into the recess on cement-based flexible tile adhesive, with a lintel over the opening.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eWaterproofing — please read\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe niche is a water-resistant substrate. It is not a waterproofing membrane. You must still apply a waterproofing membrane in accordance with AS 3740 before tiling. Polyurethane, acrylic, SBR and polymer-modified cementitious liquid membranes are all compatible. Do not use unrefined solvent-based bitumen or high-solvent adhesives over the coating. Tile with a cement-based flexible adhesive — not ready-mixed, not solvent-based. Form all internal corners and wall-to-floor junctions as flexible expansion joints, not grout.\u003c\/p\u003e\n\n\u003cp\u003eDo not fix grab rails, folding seats or basins to the niche. Those must go to the framing behind, or to a purpose-built frame.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eShape: Large format\u003c\/li\u003e\n\t\u003cli\u003eExternal size: 425 × 625mm\u003c\/li\u003e\n\t\u003cli\u003eInternal size: 401 × 601mm (± 2mm)\u003c\/li\u003e\n\t\u003cli\u003eExternal depth: 90mm\u003c\/li\u003e\n\t\u003cli\u003eInternal depth: 78mm (± 2mm)\u003c\/li\u003e\n\t\u003cli\u003eSuits: 90mm timber stud wall\u003c\/li\u003e\n\t\u003cli\u003eWall opening required: 425 × 625mm plus 2-3mm all round\u003c\/li\u003e\n\t\u003cli\u003eConstruction: 12mm coated XPS backer board, black coating\u003c\/li\u003e\n\t\u003cli\u003eSupplied with: 10 screws and 10 stainless steel washers\u003c\/li\u003e\n\t\u003cli\u003eInterior: Single open recess, no internal divider\u003c\/li\u003e\n\t\u003cli\u003eMaximum load on base: 20kg static, once installed, tiled and grouted\u003c\/li\u003e\n\t\u003cli\u003eMaximum tile weight: 62kg per square metre\u003c\/li\u003e\n\t\u003cli\u003eMinimum tile size: 100 × 100mm, at least 7mm thick\u003c\/li\u003e\n\t\u003cli\u003eOrientation: Horizontal or vertical\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Della Francesca","offers":[{"title":"Default Title","offer_id":68018143691117,"sku":"JIT-N050","price":137.95,"currency_code":"NZD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0576\/3661\/8423\/files\/5b5ed3566ddbcc6316167ea4ce3fbf1c.jpg?v=1795106262","url":"https:\/\/factoryfast.co.nz\/products\/recessed-shower-niche-425x625x90mm-prefabricated-tile-ready-wall-recess","provider":"FactoryFast.co.nz","version":"1.0","type":"link"}