Arch Shower Niche 350 x 450 x 90mm — Prefabricated Recessed Wall Niche
Available with other options:
Product Description
A prefabricated recessed shower niche, ready to install
A prefabricated niche made from coated XPS backer board. You cut and frame the opening, fix the niche to the framing, waterproof it and tile it.
The body is closed-cell extruded polystyrene with fibreglass mesh embedded in a polymer-modified cement coating on both faces, finished in a black coating. It absorbs no more than 1.2% water by volume.
Made for Australian framing
The niches are built for a 90 mm timber stud wall. A 70 mm wall is too shallow and needs packing out first. Every niche comes with 10 screws and 10 stainless steel washers in the box.
What it will take
It is a single open recess with no internal divider. Once installed, tiled and grouted, the base carries a maximum static load of 20 kg. Tiles must be at least 100 × 100 mm and at least 7 mm thick, and the tile weight must not exceed 62 kg per square metre.
Fitting it
- Measure the niche itself, then cut the opening to its external size plus 2 to 3 mm all round.
- All four edges must be supported by framing.
- Set the niche with its front edges flush with the face of the wall lining. Fix it level and plumb, through its top, bottom and side walls into the surrounding studs and noggings, with the 10 screws and 10 washers supplied. Each screw must go at least 20 mm into the timber.
- Frame a rectangular box around the niche, with the top noggin touching the top of the arch and 2 to 3 mm clear at the sides and base. Cut the wall lining to the arch shape, and fit short blocking in the two top corners so the curved edge of the lining is supported. Fix through both side walls into the studs, through the base into the bottom noggin, and through the top of the arch into the top noggin.
- Seal every screw head and the joint around the niche with waterproof sealant that is compatible with your waterproofing membrane.
- Tile the base with a slight fall towards the front so water drains out. The fall is built in the tile adhesive.
- Do not trim the niche to suit a shallower wall. Pack the wall out instead.
- In masonry, bed the niche into the recess on cement-based flexible tile adhesive, with a lintel over the opening.
Waterproofing — please read
The niche is a water-resistant substrate. It is not a waterproofing membrane. You must still apply a waterproofing membrane in accordance with AS 3740 before tiling. Polyurethane, acrylic, SBR and polymer-modified cementitious liquid membranes are all compatible. Do not use unrefined solvent-based bitumen or high-solvent adhesives over the coating. Tile with a cement-based flexible adhesive — not ready-mixed, not solvent-based. Form all internal corners and wall-to-floor junctions as flexible expansion joints, not grout.
Do not fix grab rails, folding seats or basins to the niche. Those must go to the framing behind, or to a purpose-built frame.
Specifications:
- Shape: Arched top
- External size: 350 × 450mm
- Internal size: 326 × 426mm (± 2mm)
- External depth: 90mm
- Internal depth: 78mm (± 2mm)
- Suits: 90mm timber stud wall
- Wall opening required: Frame a rectangular box with the top noggin touching the top of the arch, 2-3mm clear at the sides and base. Cut the lining to the arch shape.
- Construction: 12mm coated XPS backer board, black coating
- Supplied with: 10 screws and 10 stainless steel washers
- Interior: Single open recess, no internal divider
- Maximum load on base: 20kg static, once installed, tiled and grouted
- Maximum tile weight: 62kg per square metre
- Minimum tile size: 100 × 100mm, at least 7mm thick
We accept payment via:
FactoryFast.co.nz endeavours to provide our shoppers with a pleasant online shopping experience.
For warranty and returns information and policies please refer to our Terms and Conditions.
The product listed above shows a general product picture from the product manufacturer which may vary slightly to what is actually received therefore, reported cases of minor variations and differences to what was shown will not be covered by warranty.
-- Charmaine VIC